Scan Tool Data List
Dash Integration Module (DIM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON, Engine OFF. | |||
| Battery Voltage | Data | Volts | 12.5 |
| 8 Digit GM Part Number | ID information | 8 digits | xxxxxxxx |
| Calibration ID | ID information | 8 digits | xxxxxxxx |
| Component Serial No. xx | ID information | 1-4 digits | xxxx |
| Julian Date of Build | ID Information | 3 digits | xxx |
| PROM ID | ID information | 4 digits | xxxx |
| Year Module Built | ID information | 4 digits | xxxx |
| Ignition 1 Run/Crank | Inputs | Active/Inactive | Active |
| Ignition Accessory/Run | Inputs | Active/Inactive | Active |
| Ignition Switch | Inputs | Off/RAP/Accy./Run/Crank | Run |
| Key in Ignition | Inputs | Yes/No | Yes |
Rear Integration Module (RIM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON, Engine OFF. | |||
| Battery Voltage | Data | Volts | 12.5 |
| Ignition 1 | Data | Active/Inactive | Active |
| 8 Digit GM Part Number | ID information | 8 digits | xxxxxxxx |
| Component Serial No. xx | ID information | 1-4 digits | xxxx |
| Julian Date of Build | ID Information | 3 digits | xxx |
| PROM ID | ID information | 4 digits | xxxx |
| Year Module Built | ID information | 4 digits | xxxx |
| RAP Output | Outputs | On/Off | On |
Door Modules
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON, Engine OFF, doors closed. | |||
| Driver Door Jamb Sw. | Inputs | On/Off | Off |
| Pass. Door Jamb Sw. | Inputs | On/Off | Off |
| Left Rear Door Jamb Sw. | Inputs | On/Off | Off |
| Rt. Rear Door Jamb Sw. | Inputs | On/Off | Off |