LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> CTS Base, 2.8 T, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 362 (Wiper System & Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the level sensor rubber grommet into the washer solvent container.
  2. Lubricate the sensor body and grommet with washer fluid, to aid in installation.
  3. Twist and insert the sensor body through the grommet until the sensor is seated as originally positioned.
    4. Fig 1: View Of Headlamp Washer Output Hose, Lock & Electrical Connectors
    GM929131Courtesy of GENERAL MOTORS CORP.
  4. Connect the electrical connector (3) to the level sensor (2).
    5. Fig 2: View Of Wheelhouse Splash Shield Fasteners
    GM929129Courtesy of GENERAL MOTORS CORP.
  5. Align and install the left front lower wheelhouse (1, 2, 3) splash shield.
  6. Install the left front wheel. Refer to Tire and Wheel Removal and Installation .
  7. Lower the vehicle.
  8. Refill the washer solvent container.
  9. Inspect the operation of the pumps and the level sensor for leaks.
scientia non olet · About LEMON Manuals