Conditions for Running the DTC

DTCs P0068, P0101, P0102, P0103, P0112, P0113, P0116, P0117, P0118, P0125, P1101, P1258 are not set.
The start-up ECT Sensor parameter is less than 42°C (107°F)
The Intake Air Temperature Sensor parameter is more than -10°C (14°F).
The engine idle time is less than 95 percent.
The fuel cut off time is less than 50 percent.
The engine metal overtemperature protection (EMOP) is not active.
This diagnostic will run once in a 500 ms loop, under normal driving conditions within the enabling conditions.