LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> XLR >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Motor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Starter Motor & Connections
    GM1237944Courtesy of GENERAL MOTORS CORP.
  1. Install the starter motor.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the starter motor mounting bolts.

    Tighten:  Tighten the starter motor mounting bolts to 30 N.m (22 lb ft).

  3. Connect the starter motor "S" terminal wire (4).

    Tighten:  Tighten the starter solenoid S terminal nut to 4 N.m (35 lb in).

  4. Connect the starter motor BAT terminal wire (2).

    Tighten:  Tighten the battery cable to starter terminal nut to 10 N.m (89 lb in).

  5. Install the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical - 4.6L (LH2).
  6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
scientia non olet · About LEMON Manuals