Installation Procedure

Fig 1: Locating Battery & Cables

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

IMPORTANT: Clean any existing oxidation from the contact surface of the battery cable using a wire brush before installing the battery cable to the battery.

Connect the battery negative cable to the battery.
Tighten: Tighten the battery negative terminal bolt to 8 N.m (71 lb in).
Unlock the Theftlock® radio (if applicable).
Program the radio stations back into the radio as recorded at the beginning of the procedure.
Set the clock to the current time. Refer to Radio/Audio System Description and Operation in Entertainment.
Reinitialize both power windows. Refer to Door Control Module Programming and Setup in Programming and Setup.