LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 4.6 A, AWD >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Steering Wheel Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Connecting/Disconnecting Steering Wheel To Steering Column
    GM754877Courtesy of GENERAL MOTORS CORP.
  1. Install the steering wheel to the steering column, observing the alignment marks.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install a new steering wheel set nut.

    Tighten:  Tighten the nut to 41 N.m (30 lb ft).

  4. Remove J 42640  from the steering column.
  5. Connect the horn electrical connector.
  6. Install the steering wheel inflator module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.