LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Data Link Connector Replacement >> Removal Procedure

Removal Procedure

  1. Remove the knee bolster trim. Refer to Knee Bolster Replacement in Instrument Panel, Gages, and Console.
    2. Fig 1: View Of Data Link Connector
    GM1386648Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws (1) securing the data link connector to the instrument panel (I/P).
scientia non olet · About LEMON Manuals