LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Disc Brake System) >> Repair Instructions >> Disc Brake Hardware Replacement - Front (without J55) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Caliper Pin Bolts, Boots & Bores
    GM793825Courtesy of GENERAL MOTORS CORP.
  1. Apply a thin coat of NIGLUBE® to the following:
    • To the caliper bores (3)
    • To the inside of the pin boots (2)
    • To the new caliper pin bolts (4)
  2. Install new caliper pin bolt boots (2) to the caliper.
    3. Fig 2: View Of Brake Pads, Brake Pad Retainers, & Caliper Bracket
    GM727742Courtesy of GENERAL MOTORS CORP.
  3. Install the brake caliper bracket (3). Refer to Brake Caliper Bracket Replacement - Front (J55)  or Brake Caliper Bracket Replacement - Front (without J55) .
  4. Install the brake pad retainers (1) to the caliper bracket.
  5. Install the brake pads (2) to the caliper bracket.
    6. Fig 3: View Of Brake Caliper And Caliper Bracket
    GM178630Courtesy of GENERAL MOTORS CORP.
  6. Remove the heavy mechanics wire (1).
  7. Install the brake caliper. Refer to Brake Caliper Replacement - Front (without J55)  or Brake Caliper Replacement - Front (J55) .
scientia non olet · About LEMON Manuals