LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> DeVille Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Engine Controls - 2.8L - Introduction) >> Repair Instructions >> Intake Manifold Runner Control Solenoid Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Intake Manifold Runner Control Solenoid
    GM1285195Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: DO NOT separate the upper intake manifold from the lower intake manifold.
  1. Remove the upper intake manifold with the lower intake manifold. Refer to Intake Manifold Replacement - Lower in Engine Mechanical - 2.8L (LP1).
  2. Remove the intake manifold runner control solenoid bolts.
  3. Remove the intake manifold runner control solenoid.
scientia non olet · About LEMON Manuals