Installation Procedure

WARNING: This page is about a different car, the 2005 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of BARO Sensor

Courtesy of GENERAL MOTORS CORP.

Install the BARO sensor.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the BARO sensor bolt.
Tighten: Tighten the bolt to 10 N.m (89 lb in).

Fig 2: Identifying Barometric Pressure Sensor And Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the BARO sensor electrical connector.