LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> CTS Base, 3.6 7, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.6L - Introduction >> Repair Instructions >> Barometric Pressure (BARO) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Barometric Pressure Sensor And Electrical Connector
    GM945437Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Remove the sensor electrical connector.
    3. Fig 2: View Of BARO Sensor
    GM1285192Courtesy of GENERAL MOTORS CORP.
  3. Remove the barometric pressure sensor bolt.
  4. Remove the barometric pressure sensor.
scientia non olet · About LEMON Manuals