LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Introduction & Repair Instructions >> Repair Instructions >> Floor Shift Control Boot Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing & Installing Shift Control Boot & Knob Assembly
    GM795758Courtesy of GENERAL MOTORS CORP.
  1. Install the shift control boot and knob assembly onto the shift lever.
    2. Fig 2: Removing & Installing Shift Knob Retaining Screw
    GM795757Courtesy of GENERAL MOTORS CORP.
  2. Install the shift knob retaining screw.
    3. Fig 3: Removing & Installing Shift Boot
    GM795752Courtesy of GENERAL MOTORS CORP.
  3. Insert the front tabs of the shift control boot into the console trim plate opening.
  4. Press the rear of the shift control boot down into the console trim plate opening.
  5. Tug lightly to insure the shift control boot is securely attached to the console trim plate opening.
scientia non olet · About LEMON Manuals