Removal Procedure
WARNING: This page is about a different car, the 2006 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 .
- Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement in Steering Wheel and Column.
- Remove the wire harness assembly from the wire harness strap.
- Remove the wire harness straps from the wire harness assembly.
- Remove the wire harness strap from the upper tilt head assembly.
- Remove the SIR steering wheel module coil retaining clip.
- Remove the SIR steering wheel module coil.
- Remove the wave washer from the steering column upper shaft.
CAUTION:
Refer to SIR Caution
in Cautions and Notices.