LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.8L - Introduction >> Repair Instructions >> Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of MAF Sensor
    GM1201263Courtesy of GENERAL MOTORS CORP.
  1. Install the new MAF sensor seal and the MAF sensor.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the MAF sensor screws.

    Tighten:  Tighten the screws to 4 N.m (35 lb in).

  3. Install the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
  4. Connect the MAF electrical connector.
scientia non olet · About LEMON Manuals