LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Bracket Replacement (LS6) >> Removal Procedure

Removal Procedure

    Fig 1: Locating Generator Bracket To Engine & Mounting Bolts
    GM1455612Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Remove the generator. Refer to Generator Replacement (LP1, LY7)  or Generator Replacement (LS6) .
  3. Remove the accessory drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement - Accessory in Engine Mechanical - 5.7L.
  4. Remove the generator bracket bolts.
  5. Remove the generator bracket from the engine.
scientia non olet · About LEMON Manuals