LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Automatic >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Rear Window Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing & Installing Rear Window
    GM757629Courtesy of GENERAL MOTORS CORP.
  1. The locator pins (1) are used in order to hold the rear window in position.
  2. Install the rear window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
    3. Fig 2: Locating Rear Window Defogger Electrical Connector
    GM401856Courtesy of GENERAL MOTORS CORP.
  3. Connect all of the rear window electrical connectors.
  4. Install the headliner. Refer to Headliner Replacement in Interior Trim.
  5. Install the rear sail trim panels. Refer to Sail Panel Replacement in Interior Trim.
  6. Install the rear seat back. Refer to Seat Back Replacement - Rear in Seats.
  7. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
  8. Install the OnStar® antenna. Refer to Antenna Replacement - Cellular Communications/Digital Radio in Cellular Communication.
  9. Cycle the rear compartment lid open and close in order to position the lower reveal molding under the rear compartment lid.
  10. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About LEMON Manuals