LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Data Link Connector Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Data Link Connector
    GM700917Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the screws securing the data link connector to the I/P carrier.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  2. Install the I/P closeout panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals