LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> XLR >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls -- 4.6L (LH2) (Introduction) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of MAP Sensor Electrical Connector
    GM927850Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Disconnect the MAP sensor electrical connector.
  3. Remove the MAP sensor from the intake manifold.
  4. Inspect the MAP sensor grommet for wear or damage. If a problem is found, replace as necessary.
scientia non olet · About LEMON Manuals