Removal Procedure

Fig 1: View Of Outside Moisture Sensor & Cover

Courtesy of GENERAL MOTORS CORP.

Remove the outside moisture sensor. Refer to Windshield Outside Moisture Sensor Replacement in Wipers/Washer Systems.
Remove the outside moisture sensor cover, pulling rearward at the base of the cover, no tools are required.

Fig 2: View Of Inside Rearview Mirror & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Remove the electrical connector (1) from the back of the inside rearview mirror (2).

Fig 3: View Of Inside Rearview Mirror & Support

Courtesy of GENERAL MOTORS CORP.

NOTE: Do NOT pull rearward on the rearview mirror while installing or removing the mirror. Damage to the support or to the windshield may occur.

Remove the inside rearview mirror by pushing inward and turning firmly clockwise.
An audible click is heard when the inside rearview mirror is releasing from the support.
Remove the inside rearview mirror from the support.