Reinitialization of the Power Window

Reinitialization will be necessary anytime the door module has been disconnected. The power window will be reinitialized when the door module learns the full up and down positions.

To reinitialized the power window:

1. Close the folding top.
2. Close the door for the window being reinitialized.
3. Turn ON the ignition, with the engine OFF.
4. Run the window to the full up position and hold the switch continuously for a minimum of 0.5 seconds.
5. Run the window to the full down position and hold the switch continuously for a minimum of 0.5 seconds.