Installation Procedure

Position the remote CD changer, with the shipping plug in the bottom position, to the radio and connect the electrical lead.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the retaining screws that secure the CD changer to the radio.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).
Remove the shipping plug from the bottom of the CD changer.
Connect the electrical/audio and coaxial cable connectors to the radio control.
Install the radio control into position in the I/P center support bracket.
Align the radio control locator tab into the center support bracket locator hole.

Fig 1: View Of Radio Control & Screws

GM1237162

Courtesy of GENERAL MOTORS CORP.

Install the radio control retaining screws.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).
Install the I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory in Instrument Panel, Gauges and Console.
Install the RDO/CD MiniFuse® #5 to the I/P electrical center.
Install the cover to the I/P electrical center.