LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Door System, Mirror System & Window System) >> Repair Instructions >> Mirror Replacement - Power >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door trim panel to gain access to the power mirror wire harness connector. Refer to Trim Panel Replacement - Side Rear Door (Standard)  or Trim Panel Replacement - Side Rear Door (WC2, WC8) .
  2. Remove the garnish molding. Refer to Garnish Molding Replacement - Front Door Frame .
  3. Disconnect the power mirror wire harness electrical connector (5) from the door module.
  4. Disconnect the wire harness from the retainer clip (4).
  5. Remove the mirror fasteners (3).
  6. Remove the mirror (1) from the door.
  7. Unseat the grommet (2).
  8. Pull the wiring harness through the hole in the mirror patch.
    9. Fig 1: View Of Power Mirror & Components
    GM513972Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals