LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Lighting Systems) >> Repair Instructions >> Backup Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bulb into the bulb socket.
  2. Install the bulb assembly into the backup lamp assembly.
  3. Pull the wire harness through the body and seat the grommet.
  4. Install the backup lamp assembly to the rear compartment lid.
    5. Fig 1: View Of Backup Lamp Bulb Assembly
    GM487379Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the fasteners in order to secure the backup lamp assembly.

    Tighten:  Tighten the fasteners to 4.5 N.m (40 lb in).

    6. Fig 2: View Of Backup Lamp Assembly & Fasteners
    GM459365Courtesy of GENERAL MOTORS CORP.
  6. Connect the electrical connector.
    7. Fig 3: View Of Backup Lamp Electrical Connector
    GM488167Courtesy of GENERAL MOTORS CORP.
  7. Install the rear compartment lid trim. Refer to Compartment Lid Trim Replacement - Rear in Body Rear End.
scientia non olet · About LEMON Manuals