LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls -- 4.6L - Introduction >> Repair Instructions >> Crankshaft Position (CKP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Crankshaft Sensor
    GM602305Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the air deflector. Refer to Air Deflector Replacement - Front in Body Front End.
  3. Remove the oil filter adaptor. Refer to Oil Filter Adapter Replacement in Engine Mechanical 4.6L.
  4. Disconnect the crankshaft position sensor electrical connector.
  5. Remove the crankshaft sensor retaining bolt.
  6. Remove the crankshaft sensor.
scientia non olet · About LEMON Manuals