Installation Procedure

Fig 1: View of Rear Exhaust Hanger Rod & Tail Pipe Hanger Rod

Courtesy of GENERAL MOTORS CORP.

Apply a soapy solution to the tail pipe hanger rod and the inner diameter of the rear exhaust hanger in order to ease the installation of the hanger.
Press the rear exhaust hanger over the tail pipe hanger rod.

Fig 2: View of Rear Exhaust Hangers to Rear Exhaust Hanger Brackets Fasteners

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the nut securing the rear exhaust hanger to the rear exhaust hanger bracket.
Tighten: Tighten the rear exhaust hanger nut to 30 N.m (22 lb ft).

Fig 3: View of Center Exhaust Hanger

Courtesy of GENERAL MOTORS CORP.

Apply a soapy solution to the exhaust pipe hanger rod and the inner diameter of the center exhaust hanger in order to ease the installation of the hanger.
Press the center exhaust hanger over the exhaust pipe hanger rod.

Fig 4: View Of Center Exhaust Hangers & Bolts

Courtesy of GENERAL MOTORS CORP.

Install the bolt securing the center exhaust hanger to the rear suspension support bracket.
Tighten: Tighten the center exhaust hanger bolt to 30 N.m (22 lb ft).
Lower the vehicle.