LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Motor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of Starter Motor
    GM54606Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Connect the starter motor "S" terminal wire.

    Tighten:  Tighten the starter solenoid S terminal nut to 4 N.m (35 lb in).

  2. Connect the starter motor BAT terminal wire.

    Tighten:  Tighten the battery cable to starter terminal nut to 10 N.m (89 lb in).

  3. Install the starter motor.
  4. Install the starter motor mounting bolts.

    Tighten:  Tighten the starter motor mounting bolts to 30 N.m (22 lb ft).

  5. Install the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical-4.6L.
  6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
scientia non olet · About LEMON Manuals