Removal Procedure
- Turn OFF all the lamps and accessories.
- Make sure the ignition switch is OFF.
- Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
- Remove the negative battery cable from the battery.
CAUTION:
Refer to SIR Caution
in Cautions and Notices.
CAUTION:
Before servicing any electrical component, the ignition key must be in the OFF or LOCK position and all electrical loads must be OFF, unless instructed otherwise in these procedures. If a tool or equipment could easily come in contact with a live exposed electrical terminal, also disconnect the negative battery cable. Failure to follow these precautions may cause personal injury and/or damage to the vehicle or its components.