Installation Procedure

NOTE: Refer to Fastener Notice in Cautions and Notices.

IMPORTANT: Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the battery cable to the battery terminal.

Fig 1: View of Negative Battery Cable

Courtesy of GENERAL MOTORS CORP.

Connect the negative battery cable to the battery.
Tighten: Tighten the bolt to 17 N.m (13 lb ft).
Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
The radio incorporates electronic memory for the clock and pre-selected radio stations, reprogramming is not necessary.