LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Brake Pressure Modulator Valve (BPMV) Bracket Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying BPMV Bracket, Frame, & Connecting Bolts
    GM458872Courtesy of GENERAL MOTORS CORP.
  1. Install the BPMV bracket (1) to the frame (3).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 3 BPMV bracket to frame bolts (2).

    Tighten:  Tighten the 3 bolts to 10 N.m (89 lb in).

    3. Fig 2: View Of EBCM/BPMV Assembly
    GM458866Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Make sure that all 3 rubber isolators are installed on the BPMV. The isolators protect the EBCM/BPMV assembly from vehicle vibrations.
  3. Install the EBCM/BPMV assembly (1) to the BPMV bracket (3).
  4. Install the 2 BPMV bracket nuts (2).

    Tighten:  Tighten the 2 nuts to 10 N.m (89 lb in).

  5. Install the left front fascia extension. Refer to Fascia Extension Replacement - Front in Bumpers.
  6. Install the left front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  7. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
scientia non olet · About LEMON Manuals