LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Power Recliner Sensor Replacement - Front >> Removal Procedure

Removal Procedure

    CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 in SIR.
  2. Remove the front bucket seat. Refer to Seat Replacement - Front Bucket .
  3. Remove the seat back trim cover. Refer to Seat Back Cover and Pad Replacement - Front .
    4. Fig 1: View of Recliner Motor Retaining Clip
    GM295189Courtesy of GENERAL MOTORS CORP.
  4. Remove retainer clip from the recliner motor end of the recliner shaft.
    5. Fig 2: View of Recliner Shaft
    GM295194Courtesy of GENERAL MOTORS CORP.
  5. Slide the recliner shaft out of recliner motor sensor (outboard side) far enough to clear sensor.
  6. Disconnect sensor electrical connector from beneath the seat.
  7. Release the recliner sensor from the recliner motor.
scientia non olet · About LEMON Manuals