LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Power Recliner Sensor Replacement - Front >> Installation Procedure

Installation Procedure

  1. Install the recliner sensor to the recliner motor.

    The recliner sensor snaps onto the recliner motor.

    2. Fig 1: View of Recliner Shaft
    GM295194Courtesy of GENERAL MOTORS CORP.
  2. Slide recliner shaft back through the recliner sensor and recliner motor.
    3. Fig 2: View of Recliner Motor Retaining Clip
    GM295189Courtesy of GENERAL MOTORS CORP.
  3. Install the retaining clip to the recliner shaft.
  4. Connect the recliner motor electrical connector.
  5. Install the seat back trim cover. Refer to Seat Back Cover and Pad Replacement - Front .
  6. Install the front bucket seat. Refer to Seat Replacement - Front Bucket .
  7. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 in SIR.
scientia non olet · About LEMON Manuals