Removal Procedure

Fig 1: View Of Cruise Cable Fitting & Pin

Courtesy of GENERAL MOTORS CORP.

Open the throttle by rotating the cable cam in order to remove the tension from the cruise control cable.
Hold the throttle cam open, slide the cruise cable fitting (2) off of the pin (1) on the throttle cam by pushing the cable fitting towards the throttle close direction.

Fig 2: View of Cruise Control Cable & Cruise Control Module Buckle

Courtesy of GENERAL MOTORS CORP.

Release the tab on the cable housing in order to remove the cable housing from the cable retainer bracket.
Disconnect the cruise control cable (3) from the cruise control module buckle (2).

Fig 3: Identifying Cruise Control Cable

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Note the cable routing and retainer position for reference during installation.

Remove the cable clamps holding the cruise control cable (1) and the accelerator cable together.
Remove the cruise control cable (1) from the vehicle.