LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> SRX 3.6 7, RWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pulley Replacement >> Removal Procedure

Removal Procedure

  1. Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement in Engine Controls - 3.6L (LY7) or Air Cleaner Outlet Duct Replacement in Engine Controls - 4.6L (LH2).
  2. Release the belt tension and slide the belt off the pulley. Refer to Drive Belt Replacement - Power Steering and Air Conditioning in Engine Mechanical - 3.6L (LY7) or Drive Belt Replacement - Air Conditioning, Power Steering and Water Pump in Engine Mechanical - 4.6L (LH2).
  3. Using the J 25034-C  , remove the power steering pump pulley from the power steering pump.
    Fig 1: View Of Power Steering Pump Pulley Remover
    GM649303Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals