LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Escalade EXT >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Stabilizer Shaft, Bracket, Bolts & Insulators
    GM348364Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Place the insulators on the stabilizer shaft with the slits facing toward the front of the vehicle.
  1. Install the insulators (1) to the stabilizer shaft (4).
  2. Install the stabilizer shaft (4).
  3. Install the brackets (2) over the insulators and the stabilizer shaft.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install insulator bracket bolts (3).

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  5. Install the stabilizer links. Refer to Stabilizer Shaft Link Replacement .
    6. Fig 2: Identifying Oil Pan Skid Plate
    GM309158Courtesy of GENERAL MOTORS CORP.
  6. Install the oil pan skid plate, if equipped.

    Tighten:  Tighten the oil pan skid plate retaining bolts to 20 N.m (15 lb ft).

  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  8. Remove the safety stands
  9. Lower the vehicle.
scientia non olet · About LEMON Manuals