LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Escalade EXT >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems - Automatic >> Repair Instructions >> Blower Motor Control Processor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Blower Motor Control Processor, Screws & Electrical Connector
    GM735938Courtesy of GENERAL MOTORS CORP.
  1. Install the blower motor control processor (2) to the HVAC module (1).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the blower motor control processor retaining screws.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

  3. Connect the electrical connector (4) to the blower motor control processor (2).
    4. Fig 2: View Of Electrical Connector At The Blower Motor
    GM476821Courtesy of GENERAL MOTORS CORP.
  4. Connect the electrical connector at the blower motor.
  5. If equipped, install the sound insulator panel. Refer to Insulator Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals