Installation Procedure
- Install the antenna module (3) to the roof.
- Install the module bolt.
Tighten: Tighten the bolt to 9 N.m (80 lb in).
- Connect the antenna cable to the module (3), if disconnected.
- Connect the connector (2) to the rear quarter glass panel (1).
- Install the cable (2, 3) to the roof cross member by pushing in the retainer clips (1).
- Install the module bolt.
Tighten: Tighten the bolt to 9 N.m (80 lb in).
- Connect the antenna cable to the module (1).
- Connect the connector (2) to the rear quarter glass panel (3).
- Install the headliner. Refer to Headliner Replacement in Interior Trim.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.