LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Data Link Communication System >> Repair Instructions >> Data Link Connector Replacement >> Installation Procedure

Installation Procedure

  1. Install the data link connector to the instrument panel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the data link connector bolt.

    Tighten:  Tighten the bolt to 6 N.m (53 lb in).

    3. Fig 1: Installing Data Link Connector & Bolt
    GM786370Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals