LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> DeVille DHS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 4.6L >> Repair Instructions >> Knock Sensor (KS) Replacement >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: View Of Knock Sensor & Electrical Connector
    GM602292Courtesy of GENERAL MOTORS CORP.
  1. Install the knock sensor.

    Tighten:  Tighten the knock sensor to 25 N.m (18 lb ft).

  2. Connect the knock sensor electrical connector.
  3. Reinstall the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical.
scientia non olet · About LEMON Manuals