Removal Procedure
- Lower the window all the way down.
- Remove the door trim panel. Refer to Trim Panel Replacement - Side Rear Door .
- Remove the water deflector. Refer to Water Deflector Replacement - Rear Door .
- Remove the window inner belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Inner .
- Remove the inner window seal. Refer to Weatherstrip Replacement - Rear Door Window - Inner .
- Remove the window outer belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Outer .
- Remove the door applique. Refer to Door Frame Applique Replacement - Rear .
- Connect the door trim panel electrical connector.
- Run the window to the full up position.
- Tape the window in the up position.
- Remove the rear door stationary window post bolt.
- Loosen the window clamp nuts 4 revolutions.
- Using the power window switch, lower the window regulator to the full down position.
- Remove the tape.
- Slide the window down past the window regulator clamps and out of the front window run channel.
- Lift the window out of the door.
CAUTION:
Refer to Glass and Sheet Metal Handling Caution in Cautions and Notices.