LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Tie Rod Replacement - Inner - On Vehicle >> Assembly Procedure

Assembly Procedure

    Fig 1: Connecting Inner Tie Rod To Rack
    GM761506Courtesy of GENERAL MOTORS CORP.
  1. Attach the inner tie rod onto the rack (3).
    2. NOTE: Refer to Pipe Wrench Positioning Notice in Cautions and Notices.
  2. Place a pipe wrench on the rack (3) next to the inner tie rod housing (2).
    3. NOTE: Refer to Fastener Notice Cautions and Notices.
  3. Place a torque wrench and J 34028 on the flats of the inner tie rod housing (2).

    Tighten:  Tighten the inner tie rod to 100 N.m (74 lb ft).

  4. Install the rack and pinion boot. Refer to Rack and Pinion Boot Replacement - On Vehicle .
  5. Install outer tie rods. Refer to Rack and Pinion Outer Tie Rod End Replacement .
  6. Install the front tire and wheels. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals