LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.6L & 3.2L - Introduction >> Repair Instructions >> Intake Resonance Switchover Solenoid Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Intake Resonance Switchover Solenoid
    GM819412Courtesy of GENERAL MOTORS CORP.
  1. Position the intake resonance switchover solenoid to the intake air resonator.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the intake resonance switchover solenoid screws.

    Tighten:  Tighten the intake resonance switchover solenoid screws to 3 N.m (27 lb in).

  3. Connect the following to the intake resonance switchover solenoid:
    • The electrical connector
      • IMPORTANT: Properly position the vacuum hoses as previously noted during removal.
    • The vacuum hoses
scientia non olet · About LEMON Manuals