LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Seville STS >> Repair and Diagnosis >> External Pages >> Different car >> Section 416 (Body Front End) >> Repair Instructions >> Hood Latch Support Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the hood latch support (1) to the vehicle.
    NOTE: Refer to FASTENER NOTICE
  2. Install the bolts (2) in order to retain the hood latch support (1) to the vehicle.

    Tighten 

    Tighten the retainer bolts to 9 N.m (80 lb in).

  3. Install the hood latch. Refer to HOOD LATCH ADJUSTMENT  .
  4. Install the upper filler panel. Refer to FILLER PANEL REPLACEMENT - UPPER 
  5. Install the front bumper impact bar. Refer to IMPACT BAR REPLACEMENT - FRONT BUMPER
  6. Install the night vision camera assembly, if equipped. Refer to NIGHT VISION CAMERA REPLACEMENT
  7. Close the hood.
    Fig 1: Installing Hood Latch Support And Bolts
    G02101565Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals