LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Seville SLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 534 (Suspension Control System - Suspension Leveling) >> Repair Instructions >> Automatic Level Control Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the wheel from the vehicle. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Disconnect the height sensor connector.
    Fig 1: View of Automatic Level Control Sensor
    GM517954Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the sensor link from the ball stud.
  5. Loosen the sensor mounting nut.
  6. Disengage the anti-rotation tab and slide the sensor downward.
  7. Remove the sensor from the vehicle.
scientia non olet · About LEMON Manuals