Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.

Gently pry the trim cover outward in order to remove the cover from the rain sensor module.

Fig 1: View of Rain Sensor Module Trim Cover

Courtesy of GENERAL MOTORS CORP.

Remove the trim cover from the rain sensor module.

Fig 2: View of Rain Sensor Module

Courtesy of GENERAL MOTORS CORP.

Release the windshield coupler retaining clips.
Remove the rain sensor module.
Disconnect the electrical connector from the rain sensor module.