LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Seville SLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 506 (Theft Deterrent System) >> Repair Instructions >> Theft Deterrent Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Theft Control Module & Bracket
    GM141857Courtesy of GENERAL MOTORS CORP.
  1. Slide the module (2) up into the bracket (1) until the bottom clears the bracket and sits flush within the bracket.
  2. Connect the electrical connector.
  3. Install the driver side sound insulator. Refer to Closeout/Insulator Panel Replacement - Left (LHD) or Closeout/Insulator Panel Replacement - Left (RHD) or Closeout/Insulator Panel Replacement - Right (LHD) or Closeout/Insulator Panel Replacement - Right (RHD) in Instrument Panel Gages and Console.
  4. Program the theft deterrent system. Refer to Programming Theft Deterrent System Components .
scientia non olet · About LEMON Manuals