LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Seville SLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 401 (Automatic Transaxle - 4T80-E) >> Repair Instructions >> Shift Control Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the console trim plate. Refer to TRIM PLATE REPLACEMENT - FRONT FLOOR CONSOLE (DTS)
    Fig 1: Removing Console Trim Plate
    G02098975Courtesy of GENERAL MOTORS CORP.
  2. Unsnap the shift cable terminal from the shifter pin.
    Fig 2: Unsnapping Shift Cable Terminal From Shifter Pin
    G02098976Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the automatic transmission shift lock actuator solenoid wire harness connector.
  4. Remove the shifter fasteners.
  5. Remove the shifter assembly.
    Fig 3: Removing Shifter Assembly & Fasteners
    G02098977Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals