LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 669 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Stabilizer Shaft Link
    GM750841Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Apply threadlocker 242 or equivalent to the threads of the stabilizer shaft link.
  1. Install the stabilizer shaft link.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the stabilizer shaft link retaining nuts.

    Tighten:  Tighten the nuts to 50 N.m (37 lb ft).

    3. Fig 2: Connecting ABS Sensor Wiring Harness To The Stabilizer Shaft Link
    GM746681Courtesy of GENERAL MOTORS CORP.
  3. Connect the ABS sensor wiring harness to the stabilizer shaft link.
  4. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals