Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Snap the door lock switch into the door switch bezel.
Connect the electrical connector.

Fig 2: Pressing Down On The Front Of The Door Lock Switch To Engage The Switch To The Door Trim Panel

Courtesy of GENERAL MOTORS CORP.

Insert the rear of the door lock switch into the door trim panel.
Press down on the front of the door lock switch to engage the switch to the door trim panel.