LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 640 (Engine Controls - 5.7L - Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Pressing Fuel Tank Pressure Sensor Into Fuel Tank
    GM802790Courtesy of GENERAL MOTORS CORP.
  1. Press the fuel tank pressure sensor into the fuel tank, until the locking tabs are fully seated.
  2. Close the retaining strap.
  3. Connect the electrical connector to the fuel tank pressure sensor.
  4. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals