LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 583 (Wiper System And Washer System) >> Repair Instructions >> Wiper Transmission Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the transmission drive links (4) to the pivot arms (3,5).
    Fig 1: Positioning Transmission Drive Links To Pivot Arms
    G02095279Courtesy of GENERAL MOTORS CORP.
  2. Install the drive links onto the wiper motor crank arm and the wiper transmission drive shafts with the J 39529  .
    Fig 2: Installing Drive Links On Wiper Motor Crank Arm
    G02095280Courtesy of GENERAL MOTORS CORP.
  3. Install the wiper motor module assembly Refer to WIPER MOTOR MODULE REPLACEMENT (LHD)  or WIPER MOTOR MODULE REPLACEMENT (RHD)  .
    Fig 3: Installing Wiper Motor Module Assembly
    G02095281Courtesy of GENERAL MOTORS CORP.
  4. Install the air inlet grille panel. Refer to AIR INLET GRILLE PANEL REPLACEMENT (LHD) or AIR INLET GRILLE PANEL REPLACEMENT (RHD) in Body Front End.
  5. Install the wiper arms (1,4). Refer to WIPER ARM REPLACEMENT (LHD)  or WIPER ARM REPLACEMENT (RHD)  .
  6. Operate the wipers and check for proper operation.
    Fig 4: Installing Wiper Arms
    G02095282Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals